Common Roof Damage and Why You Shouldn’t Ignore It

Roofs are made up of many different layers, including plywood, shingles, vapor barrier, and more. All of these layers are very important to the roof because they work together to keep out bad weather. If one layer is broken or damaged it can lead to other layers being broken or damaged also. 

Roof damage can be caused by many different things, including hail, wind, fallen branches, etc.  All of these things can seriously damage a roof and cause it to leak. This means you should call a repair service right away after the damage has been done because it may lead to more serious damage to your property.

In this article, we will explain the most common types of roof damage and what you should do if you have been a victim.

Ice dams

Ice dams are caused by heat escaping from the home, which melts snow on the roof. As this melted snow slides down the roof, it collects near your gutters and forms ice. If these ice dams are not kept under control, when rain hits the ice it begins to melt and can cause leaks leading to water damage inside your home. In many neighborhoods in Maryland, this is an occasional problem. However, you have a great solution for this problem if it arises. Hiring a Maryland roofing contractor will help you with ice dam prevention and roof restoration in your area. Moreover, they will give you a long-term solution and help you avoid further damage.

Broken Or Missing Shingles

The shingles on your roof are an important part of the protection system. If there are missing shingles in your area, this can cause leaks allowing rainwater to enter your home’s walls which can lead to mold growth or other types of water damage inside your house. Mold is dangerous if inhaled so you should have it removed as soon as possible. Also, if you see signs of rust around ventilation fans or air conditioners, this means that there is leaking going on somewhere in your roof. You should contact a contractor immediately to help you with the roof restoration process because it will be much easier to fix this problem sooner rather than later.

Blistering

Blistering means that the paint was applied improperly which caused air bubbles under the paint surface. When water hits the bubble, it expands and pushes the paint up. This is because it doesn’t have anywhere to go when water hits it so what happens? It pushes back. Blistering is a serious issue that should be taken care of immediately. If you notice any bubbling or blistering on your roof you should contact a contractor right away to come out and assess the damage.

Flashing Problems

Flashings are metal pieces installed around skylights, chimneys, vent pipes, vents, and other parts of your roof to keep water from entering. There are two types of flashings used in roofs: Step Flashing and Counterflashing. 

Step flashing is when the metal covers over the seam between two different roofing materials. This keeps water out by creating a barrier at that point where the materials meet. Counterflashing is covering over the head of a nail or screw that’s attached to another part of your roofs like siding or wall cladding. This keeps water out because it creates an extended seal over the seam so no water can get through there.

Most common flashing problems include loose or missing counterflashing. If your counterflashing has come lose it can lead to larger problems with your roof. It can be caused by the metal expanding and contracting with temperature changes causing the fasteners to come loose. This can be fixed by re-fastening these countersunk screws. If you see any signs of loosened or missing step flashing, this usually means that there is an issue with your shingles so contacting a contractor right away will help them finish their work before the problem gets worse.

Damaged Chimney

Another thing that can lead to roof damage is a damaged chimney. It’s easy to spot this problem because it usually occurs on the front of the house and near the peak of your roof. This is caused by water and ice buildup around the bricks and mortar which over time caused deterioration. If untreated, this can also lead to roof leaks and other damaging problems inside your walls. The repair can be somewhat expensive, and that is why these damages should be prevented by hiring a roofing contractor to do proper chimney flashing with aluminum or stainless steel. It will save you a lot of money in the long run.

Roof damage of any kind can be very dangerous and lead to bigger problems if not taken care of immediately. For this reason, it is highly recommended to always have an open line of communication with a reliable roofer who can provide you with more information on how to deal with this type of damage.

Leave a Comment